An Easy Table Centrepiece For All Occasions Using Picture Frames

DISCLAIMER: I was sent the Gorilla Glue products free of charge to use on craft projects, but this does not affect my opinions of them. All views are my own.

I love finding or making versatile items that can be used for lots of different things. One item to suit so many occasions. I recently made one such item, and it was so quick and easy to do, needing just a few things to make it.

There’s probably a name for this type of centrepiece but my brain isn’t telling me it so I’ll just call it a picture frame display. I have seen other people make square ones and stick photographs on each side, with a light inside to illuminate them gently. They are very pretty, but I wanted something that I could re-use at Christmas, barbecues, family get-togethers, birthdays, etc. I also wanted a different shape to the square ones I have seen, so decided to make a triangle one. You could of course make it any shape you want, but bear in mind that the more picture frames you use, the bigger it will be so the more space it will need on your table.

I mentioned already that it is easy to make, and that is thanks to using top quality products to hold the frames together. The people I have seen making the square ones have used hot glue to stick theirs together, but it is much easier to use a super adhesive tape instead. Gorilla Glue have a fantastic tape called Gorilla Tape Crystal Clear. It is a virtually invisible, super strong, waterproof, airtight, flexible tape, making it perfect for this project (and many others).

Depending on what you will be putting inside your centrepiece, you might need to glue a base on to the bottom. For this, I used Gorilla Glue Super Glue Precise Gel. It has a very thin nozzle, and the glue is a thick gel, making it much easier to control exactly where you apply it with no run. It dries rapidly too making it perfect for quick projects, and has a very strong hold. I only needed a base on my display for the one at the start of this post. I didn’t fancy trying to clear a pile of sand up at the end!!!

As well as the tape and glue, you will need 3 picture frames all the same size, a pen, strong thick cardboard, and a pair of scissors or craft knife. That is all. You can use elaborate looking frames or plain, but the edges will need to be straight so they can meet up perfectly to hold them together. You can paint your frames too if you prefer, to match the occasion. THIS CRACKLE EFFECT would look effective for this.

To begin, take any paper, pictures, mounts, and the backing from the picture frames. Keep the glass in though, and bend the fasteners down to hold it firmly in place.

Make sure the fasteners are not visible through the glass from the front. If they are, just bend them a bit more until you can no longer see them.

When you have done this, lie them on the table face down and position them side by side in a row. They need to be perfectly lined up so that there are no gaps at the bottom.

Cut a strip of tape long enough to completely stick 2 frames together without any gaps. You might need to cut the tape into a thinner strip depending on the thickness of your frames. Repeat to stick the second and third frames together. As you can see in the picture above, the tape is practically invisible.

To make the triangle shape, cut a strip of tape and stick it on either the left or the right open sides, so that it is half on the frame and half off. Stand the frames up, fold the overhanging tape back, and bring the frames together to form the triangle shape. Press the frames together well so that the overhanging strip perfectly joins them. If you can see any tape above the tops of the frames, carefully cut that off.

The tape is so strong that this will now hold together for multiple uses. If you want a base on yours, stand the frames on a strong piece of thick card and draw around it as close to the frames as possible.

Cut the shape out just inside the lines you have drawn, so that it doesn’t stick out when you glue it on to the frames. You can use scissors but I found it easier to use a craft knife. If using a knife, obviously make sure you have something underneath the card so you don’t cut your table!!

Squeeze a line of the Super Glue Gel on to the bottom of each frame.

Carefully place the cardboard cutout on to the frames, making sure it is lined up exactly, then press the edges down firmly.

Your display is now ready to use! You can fill it with decorative sand, as I did in the first picture. I added a candle and some shells. This would be perfect for beach themed wedding table centrepieces or Summer parties. Or use it as a terrarium to display small succulents or cacti.

How about some dried oranges, cinnamon sticks, and gourds for an Autumnal table?

Or filled to the top with baubles and beads for Christmas, You could add fairy lights to make it really pretty.

You could layer different coloured strings of beads and add a candle for a Christmas dinner table.

Or place a little posy of flowers inside to stop little fingers messing with them. For the display below, I just covered a shot measuring cup with copper twine, and used it to hold some forget-me-nots from the garden. This would make a fitting centrepiece for a funeral wake. (You won’t need a base for little flower arrangements).

These are just a few ideas. As you can imagine, the possibilities are endless!

Happy crafting 🙂

 

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.